System BHL-F Heating loops Ready for Connection for Smaller Roofs
The heating lines are produced in different lengths with the fitting connection pipes in fixed lengths in the factory and subsequently rolled up to rings.
The Assembly of the heating line takes normally place by means of assembly tape or by ribbon type.
The type of assembly allows the fixing of the heating line with the same space and the fixing at the roof construction together.
Even complicated roof shapes can be entirely heated if needed.
Technical Data:
Voltage: | AC 230V |
Rated capacity: | 15 W/m (to 28 W available on request) |
Diameter: | 6-8 mm |
Standards: | IEC 0800 |
Connection: | one-sided connection 1 x 3 m (3x1,5 mm²) |
Properties: | robust, weather resistant, UV-resistant |
Heating pad selection table type BHL-F
Ord.-No. | Description | Length m | Total capacity W | Total resistance Ω |
8000-53.04 | BHL-F-4 | 4 | 60 | 838-970 |
8000-53.08 | BHL-F-8 | 8 | 120 | 419-485 |
8000-53.16 | BHL-F-16 | 16 | 255 | 197-228 |
8000-53.24 | BHL-F-24 | 24 | 360 | 140-162 |
8000-53.32 | BHL-F-32 | 32 | 485 | 104-120 |
8000-53.40 | BHL-F-40 | 40 | 630 | 80-92 |
8000-53.47 | BHL-F-47 | 47 | 740 | 68-79 |
8000-53.56 | BHL-F-56 | 56 | 865 | 58-67 |
8000-53.73 | BHL-F-73 | 73 | 1135 | 44-51 |
8000-53.80 | BHL-F-80 | 80 | 1240 | 41-47 |
8000-53.89 | BHL-F-89 | 89 | 1370 | 37-42 |
8000-53.97 | BHL-F-97 | 97 | 1505 | 33-39 |
8000-53.13 | BHL-F-113 | 113 | 1745 | 29-23 |
8000-53.19 | BHL-F-119 | 119 | 1745 | 27-31 |
8000-53.27 | BHL-F-127 | 127 | 1985 | 25-29 |
8000-53.43 | BHL-F-143 | 143 | 2215 | 23-26 |
8000-53.67 | BHL-F-167 | 167 | 2575 | 20-23 |